HPE Aruba Networking 765EX Outdoor Access Points
Compact and versatile high performance Wi-Fi 7 connectivity for indoor industrial, outdoor, and hazardous locations

HPE Aruba Networking AP-765 Indoor Access Point

Aruba Networks Products

HPE Aruba Networking Outdoor Access Points

HPE Aruba Networking AP‑765EX Flex Radio 2x2 Wi‑Fi 7 Dynamic Omni‑Directional Hazardous Locations Access Point

#S4K29A
Get a Quote!

Click here to jump to more pricing!

Overview:

The HPE Aruba Networking 760 Series Outdoor Access Points bring high performance Wi‑Fi 7 to outdoor and environmentally challenging locations such as industrial sites, warehouses, and large public venues. Leveraging the latest Wi‑Fi 7 standard, these small form factor access points enhance security across both wired and wireless networks, support IoT devices, and provide accurate location‑aware capabilities. HPE Aruba Networking Central provides a single pane of glass for overseeing every aspect of wired and wireless LANs, WANs, and SD‑WAN, and helps drive efficient operations with AI‑automation and machine learning (ML) insights for improved wireless connectivity.

With integrated high‑power Bluetooth and Zigbee radios, fast wired connectivity, and a limited lifetime warranty, the HPE Aruba Networking 760 Series Outdoor Access Points provides high performance outdoor connectivity you can depend on, delivering up to 5.8 Gbps maximum aggregate data rates using 6 GHz (4x4).

For more extreme environments, the HPE Aruba Networking 760 Series Outdoor Access Points includes models that are hazardous location (HazLoc) compliant, making them ideal for environments such as oil rigs, industrial manufacturing, and transportation sites.

AI-powered Wi-Fi 7

Managing Wi‑Fi 7 access points is easier with HPE Aruba Networking Central that provides intelligent automation, AI insights, and unified infrastructure management. HPE Aruba Networking access points work in tandem with the HPE Aruba Networking Central network management system to securely orchestrate users, apps, and IoT connections. HPE Aruba Networking Central provides observability that extends to third‑party devices and management of campus wired and wireless assets, powered by purpose‑built AI. The HPE Aruba Networking 760 Series Outdoor Access Points are supported by HPE Aruba Networking Central running HPE Aruba Networking Wireless Operating System (OS 10).

HPE Aruba Networking Wi-Fi solutions

Wherever Wi‑Fi is needed, HPE Aruba Networking Wi‑Fi 7, Wi‑Fi 6E, and Wi‑Fi 6 access points are ready to provide fast, reliable, and secure coverage. Our access points provide broad network observability, improve mobile client coverage, optimize Wi‑Fi bandwidth, and increase operational efficiencies with a choice of cloud or on‑premises deployment options. Our portfolio includes Wi‑Fi‑certified indoor, outdoor, ruggedized, and remote Wi‑Fi access points to address a wide range of enterprise use cases and price points, with solutions backed by a limited lifetime warranty.

As part of a full portfolio of Wi‑Fi 7 access points, the HPE Aruba Networking 760 Series Outdoor Access Points offer a versatile, small form factor, high performance industrial and ruggedized solution for fast, resilient, and secure Wi‑Fi 7 wireless access. Supported by HPE Aruba Networking Central, they help deliver an AI‑powered, security‑first network.

Key features¹

Wi‑Fi 7 (802.11be) brings multilink operation (MLO) for channel aggregation, 4K QAM for higher throughput and lower latency, and the 6 GHz band for more than double the available capacity.
Dual radio, tri‑band coverage across 2.4 GHz, 5 GHz, and 6 GHz for 5.8 Gbps (6 GHz 4x4 160 MHz) Gbps peak aggregate data rate
Flexible radio delivers up to 4.3 Gbps maximum 5 GHz + 6 GHz aggregate data rate, using dual 2x2 MIMO radios (5 GHz and 6 GHz) or up to 5.8 Gbps using 6 GHz (4x4) with 160 MHz
Flexible deployment with dynamic antennas (integrated omni and directional, software provisioned)
Industrial IoT‑ready platform with integrated Bluetooth and 802.15.4/Zigbee radios
Fast wired connectivity with 5GbE port
Low Power Indoor (LPI) power and Standard Power (SP) device operation, where available
Embedded GPS receiver for location and standard power support
Class 1 Division 2 and ATEX Zone 2 certified (AP‑765EX only)2
Connectorized model supports external antennas
AI‑powered dynamic power save mode helps reduce energy use

Key Features:

More capacity

The HPE Aruba Networking 760 Series Outdoor Access Points are designed to take advantage of every bit of available spectrum using three dedicated radios, which translates into high speeds, wider channels for multigigabit traffic, and less interference. Supports up to 160 MHz wide channels, the series delivers up to 4.3 Gbps maximum 5 GHz + 6 GHz aggregate data rate, using dual 2x2 MIMO radios (5 GHz and 6 GHz 2x2), or up to 5.76 Gbps (in 6 GHz only 4x4).

Ruggedized and outdoor ready

The versatile HPE Aruba Networking 760 Series Outdoor Access Points are purpose‑built to deliver high performance Wi‑Fi 7 across a range of environmental conditions: indoors, outdoors, and hazardous environments. Models are ready to withstand exposure to extremely high and low temperatures, with SP models have protection from persistent moisture and precipitation. The HPE Aruba Networking 760 Series Outdoor Access Points are fully IP 66/ IP 67 rated to keep out airborne Table 1. Channel bandwidth and peak data rate Band contaminants. All electrical interfaces include industrial‑strength surge protection as well. Ideal environments include:

Industrial and outdoor environments
Large public venues
Hazardous environments

Wi-Fi 7 for faster speeds, more capacity

The Wi‑Fi 7 standard (802.11be) extends the capabilities of Wi‑Fi 6E, including the use of the 6 GHz band. New capabilities include multi‑link operation (MLO) for channel aggregation across different bands and failover, 4096 QAM (4K QAM) modulation for higher peak data rates, and spectrum puncturing to avoid interference or incumbent users of the 6 GHz band.

Flexible operation and simplified deployment

HPE Aruba Networking's unified access points can operate as stand‑alone access points or with a gateway for greater scalability, security, and manageability. HPE Aruba Networking access points can be managed by AIpowered HPE Aruba Networking Central that provides a single pane of glass for overseeing every aspect of wired and wireless LANs, WANs, and SD‑WAN. AI‑powered analytics, end‑to‑end orchestration and automation, and advanced security features are built natively into the solution.

HPE Aruba Networking Wireless Operating System

Cloud‑native HPE Aruba Networking Wireless Operating System (OS‑10) is the distributed network operating system working with HPE Aruba Networking Central that acts as the control layer for HPE Aruba Networking access points and gateways. With its flexible architecture, IT can deliver reliable and secure wireless connectivity for small offices, midsized branches, large campus environments, and remote workers.

Access points as flexible and secure IoT platform

By combining the IoT radio with a zero trust network framework, the HPE Aruba Networking 760 Series Outdoor Access Points can serve as flexible IoT platforms that bolster network security, provide coverage for a broad range of IoT devices, and reduce the need for network overlays just for IoT devices.

The HPE Aruba Networking 760 Series Outdoor Access Points includes an integrated Bluetooth 5.4 and 802.15.4 radio for Zigbee support to simplify deploying and managing IoT‑based location services, asset tracking services, security solutions, and IoT sensors. There is also a USB host port to provide IoT connectivity to a wider range of devices.

These IoT capabilities allow organizations to leverage the access point as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources and can accelerate IoT initiatives.

In addition, Target Wake Time (TWT) establishes a schedule for when clients need to communicate with an access point. This helps improve client power savings and reduces airtime contention with other clients, which is ideal for IoT.

Simple and secure access

To improve security and ease of management, IT can centrally configure and automatically enforce role‑based policies that define proper access privileges for employees, guests, contractors, and other user groups — no matter where users connect on wired and WLANs. Dynamic segmentation eliminates the time‑consuming and error‑prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic secure and separated.

Seamless handoffs to cellular

Built on the technical foundations of Passpoint and Wi‑Fi Calling, HPE Aruba Networking Air Pass creates a roaming network across the HPE Aruba Networking enterprise customer footprint, extending cellular coverage and enhancing the visitor and subscriber experience to deliver a great experience for your guests while reducing costs and management overhead for DAS.

Standards-based technologies

The HPE Aruba Networking 760 Series Outdoor Access Points also include the following standards‑based technologies:

Transmit beamforming (TxBF) to increase signal reliability and range
Dynamic frequency selection (DFS) to optimize use of available RF spectrum
Maximum Ratio Combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) to deliver greater downlink RF performance
Space‑time block coding (STBC) to increase range and improve reception
Low‑density parity check (LDPC) to provide high‑efficiency error correction and improve throughput

Specifications¹:

HPE Aruba Networking AP‑765EX Wi‑Fi 7 Outdoor Access Point
Hardware variants
HPE Aruba Networking 760 Series Outdoor Access Points (AP‑765) Built‑in dynamic antennas (software selectable omnidirectional or directional antennas) 2.4 GHz antennas ~4.5 dBi omnidirectional / 7.5 dBi directional (maximum) 5 GHz antennas ~5.5 dBi omnidirectional / 8 dBi directional (maximum) 6 GHz antennas ~5.5 dBi omnidirectional / 8.5 dBi directional (maximum) BLE/Zigbee: Integrated omnidirectional antenna with peak gain of ~5.0 dBi (maximum) GNSS antenna gain ~3.0 dBi (maximum) Final antenna gains pending regulatory certification completion
Wi-Fi radio specifications
Access point type: Outdoor, tri‑band capable dual‑radio AP supporting 2.4 GHz, 5 GHz, and 6 GHz (any two) 802.11be 2x2 MIMO 2.4 GHz radio: Two spatial stream single user (MU) MIMO for up to 688 Mbps wireless data rate with 2SS EHT40 802.11be customer devices 5 GHz radio: Single‑Radio Mode: Four spatial stream SU MIMO for up to 2.9 Gbps wireless data rate with 2SS EHT80 802.11be client devices Dual‑Radio Mode: Two spatial stream MU MIMO for up to 1.44 Gbps wireless data rate with 2SS HE80 802.11ax customer devices 6 GHz radio: Single‑Radio Mode: Four spatial stream SU MIMO for up to 5.8 Gbps wireless data rate with 2SS EHT160 802.11be client devices Dual‑Radio Mode: Two spatial stream SU MIMO for up to 2.9 Gbps wireless data rate with 2SS HE160 802.11ax customer devices Up to 400 associated customer devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6 GHz radio) Supported frequency bands (country‑specific restrictions apply): 2.400 to 2.4835 GHz ISM 5.150 to 5.250 GHz U‑NII‑1 5.250 to 5.350 GHz U‑NII‑2 5.470 to 5.725 GHz U‑NII‑2E 5.725 to 5.850 GHz U‑NII‑3/ISM 5.850 to 5.895 GHz U‑NII‑4 5.925 to 6.425 GHz U‑NII‑5 6.425 to 6.525 GHz U‑NII‑6 6.525 to 6.875 GHz U‑NII‑7 6.875 to 7.125 GHz U‑NII‑8 Available bands and channels: Dependent on the configured regulatory domain (country) Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5 GHz band Including zero-wait DFS (ZWDFS) to accelerate channel changes Supported radio technologies: 802.11b: Direct‑sequence spreadspectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequencydivision multiplexing (OFDM) 802.11ax/be: OFDMA with up to 37 RU Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16‑QAM, 64‑QAM and 256‑QAM (proprietary extension) 802.11ac: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM and 1024‑QAM (proprietary extension) 802.11ax: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM, and 1024‑QAM 802.11be: BPSK, QPSK, 16‑QAM, 64‑QAM, 256‑QAM, 1024‑QAM, and 4096‑QAM 802.11n high throughput (HT) support: HT20/40 802.11ac very high throughput (VHT) support: VHT20/40/80 802.11ax high efficiency (HE) support: HE20/40/80/160 802.11be extreme high throughput (EHT) support: EHT20/40/80/160 Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (MCS0 to MCS15, HT20 to HT40) 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160) 802.11ax: 7.3 to 4,804 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160) 802.11be: 7.3 to 11,530 (MCS0 to MCS13, NSS = 1 to 4, EHT20 to EHT160) 802.11n/ac packet aggregation: A-MPDU, A-MSDU Transmit power: Configurable in increments of 0.5 dBm ACC minimizes the impact of interference from cellular networks MRC for improved receiver performance CDD/CSD for improved downlink RF performance STBC for increased range and improved reception LDPC for high‑efficiency error correction and increased throughput TxBF for increased signal reliability and range 802.11ax Target Wait Time (TWT) to support low‑power client devices 802.11mc/az Fine Timing Measurement (FTM) for precision distance ranging
Wi-Fi antennas
HPE Aruba Networking AP‑763/765: Integrated tri‑band dynamic antennas (software‑provisionable omnidirectional or directional) Omnidirectional — 4.5 dBi antenna gain in 2.4 GHz, 5.5 dBi antenna gain in 5 GHz, and 5.5 dBi antenna gain in 6 GHz, 5 dBi IoT antenna gain, and 3 dBi GNSS Directional — 7.5 dBi antenna gain in 2.4 GHz, 8.0 dBi antenna gain in 5 GHz, and 8.5 dBi antenna gain in 6 GHz, 5 dBi IoT antenna gain, and 3 dBi GNSS Final antenna gain pending regulatory certification completion HPE Aruba Networking AP‑764: Outdoor IP rated RP‑SMA connectors 2.4/5 GHz: 2x RP‑SMA Connectors 6 GHz: 2x RP‑SMA Connectors IoT: 2x RP‑SMA Connectors GPS: 1x RP‑SMA Connector
Other interfaces and features
Wired network interface (E0) Auto‑sensing link speed (100/1000/2500/5000BASE‑T) and MDI/MDIX 5 Gbps speed complies with NBase‑T and 802.3bz specifications PoE‑PD: 48Vdc (nominal) 802.3at/bt PoE (class 4 or higher) 802.3az Energy Efficient Ethernet (EEE) USB 3.0 host interface (Type C connector), supporting 2A/10W maximum USB 2.0 host interface (Type A connector), supporting 1A/5W maximum Bluetooth (BLE5.4 w/HADM) and Zigbee (802.15.4) radio BLE: Up to 8 dBm transmit power (class 1) and –100 dBm receive sensitivity (125 kbps) Zigbee: Up to 8 dBm transmit power and –97 dBm receive sensitivity (250 kbps) GNSS L1 (1575.42 MHz) and L5 (1176.45 MHz) receiver Receive sensitivity: –160 dBm (tracking) Integrated omnidirectional antenna with roughly 30° to 40° downtilt and peak gain of 3 dBi (AP‑763/765) 30 dBi GPS antenna and external mount included (AP‑764) AIC allows concurrent operation of multiple radios in the 2.4 GHz band Built‑in TPM for enhanced security and anti‑counterfeiting Visual indicators for system and radio status (1x multicolor LED), auto‑disable after 15 minutes is up Reset button: factory reset, LED mode control (normal/off) Serial console interface (proprietary, USB‑C physical jack) Automatic thermal shutdown and recovery function
Power sources and power consumption
The access point supports PoE on port E0 Power sources are sold separately When powered by 802.3bt (class 5) PoE, the access point will operate without restrictions. When powered by 802.3at (class 4) PoE with the IPM feature disabled, the access point will disable the USB‑C port. Operating the access point with an 802.3af (class 3 or lower) PoE source is not supported (except for access point staging) With IPM enabled, the access point will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable.
Mounting
HPE Aruba Networks 760 Series Outdoor Access Points (AP‑763): Mounting bracket rail is preinstalled on the back to secure the AP‑763 to one of the compatible indoor mounting kits (sold separately). Includes posts to support the addition of AP‑270‑MNT‑ADP for use with the outdoor AP mounts (also sold separately). HPE Aruba Networks 760 Series Outdoor Access Points (AP‑764) and HPE Aruba Networks 760 Series Outdoor Access Points (AP‑765): Mounting bracket mount holder is preinstalled on the back to secure the AP‑764/AP‑765 to one of the compatible outdoor mounting brackets (sold separately). Includes posts to support the addition of AP‑MNT‑MP10‑AP mount brace for use with the indoor mounting brackets (also sold separately).
Environmental specifications
Operating conditions Temperature: With solar cover: –40°C to +65°C / –40°F to +149°F Without solar cover: –40°C to +55°C / –40°F to +131°F Humidity: 5% to 100% noncondensing internal Rated for operation in all weather conditions Storage and transportation conditions Temperature: –40°C to +70°C / –40°F to +158°F Operating altitude: 3000m Water and dust — IP 66 / IP 67 Salt tolerance — Test to ASTM B117‑07A salt spray 200 hrs
Regulatory compliance
FCC/ISED CE marked RED directive 2014/53/EU IEC/EN 62368‑1 EN 60601‑1‑1, EN60601‑1‑2
Certifications
Wi‑Fi Alliance: Wi‑Fi certified a, b, g, n, ac, 6, 7 WPA2 and WPA3 (enterprise, personal), Enhanced Open (OWE) WMM, Wi-Fi agile multiband Bluetooth SIG Ethernet Alliance (E0) Class 1 Division 2 (EX models only, pending release) ATEX Zone 2 (EX models only, pending release) IECEx (EX models only, pending release)
Warranty
HPE Aruba Networking hardware limited lifetime warranty
Minimum operating system software versions
HPE Aruba Networking Wireless Operating System (OS‑10.9)

Documentation:

HPE Aruba Networking 760 Series Outdoor Access Points Datasheet (.PDF)

Note:
¹ Specifications for the HPE Aruba Networking 760 Series Outdoor Access Points are preliminary and subject to change

Pricing Notes:

Pricing and product availability subject to change without notice.